DIY: Burlap-Covered Corkboard

For awhile, I've loved the look of the nailhead-trimmed, burlap covered corkboard offered by Ballard. I have several Ballard things and love them all, so by no means am I hating on them! The burlap corkboard was just more than I wanted to pay, especially not having a specific place in mind for where I wanted to hang it.  After seeing a few Pinterest DIYs, I figured I could do this myself!

I had a plain corkboard in an upstairs closet that I wasn't using and a lot of burlap fabric just waiting for some project! This meant I needed a staple gun and some upholstery tacks. I also needed some additional cork for the board.

I did a poor job of taking photos as I went along (especially in the beginning), but I'll try to explain my process!

Let me first say, I know this is not an awesome "DIY" post by any means! It's more "read the instructions" than "follow along with pics" which, as we all know, are far more helpful. I'm sharing, though, because I didn't really follow any DIYs to the letter...

I knew covering just the board (as-is) with burlap or the cork would cause the middle to sag (because of the wood frame). So, I found something build up the center making it flush with the wood frame. Using something I already had...I used a flattened Priority Mail box that I trimmed a bit. Whoop, free!

Once I had everything flush, I used a roll of cork to make a new cork surface.

This is from Amazon, but I got mine at Lowe's. Basically the same and the price was similar, if not a bit cheaper. Once I had the new cork applied and trimmed to size, it was time to bring out the burlap.

I laid out the burlap on the floor and laid the corkboard facedown to figure out the appropriate size. After I trimmed the piece I was going to use, I ironed the daylights out of it! Because burlap is so thick, I used the hottest setting on the iron, spraying the wrinkles with water before ironing.

Once I was satisfied, I again laid out the burlap on the floor, put the corkboard facedown, and pulled the edges back. I borrowed an electric staple gun from my coworker and enlisted TJ's help in pulling the burlap tight enough to the back of the board. I used a lot of staples...

Clearly I need to trim the burlap and apply the "no-fray" stuff I have...

Moving on now that the board is covered! Ta-da! (And now I put it away for a few days. I needed a break as this was not going as fast as I expected!)

Time to work on the trim!

I used these furniture nails from Lowes. They were 25 to a pack and only $1.30 each. You'll need more than one pack, but be careful when buying them to ensure they match fairly well. There were two completely different colors at Lowes that both said "brass."

 I thought this part would be easy. Wrong!

The wood frame beneath all the cork and burlap proved to be problematic when trying to add the trim. The upholstery tacks/furniture nails were very soft and kept bending when I tried to hammer them into the wood. So, I got a rubber mallet and used pliers to hold them in place, but the problems continued. I tried drilling tiny holes to get me started. People, I BROKE A DRILLBIT and it barely even worked! TJ suggested a slightly larger drillbit, and drilling a slightly smaller hole. This proved much more successful...

Before I started drilling all the holes I measured the distance and spacing of where I wanted the tacks and placed small sharpie marks, which you can see above. I used the drill holes to get me started, then used the mallet to hammer the tacks flush with the board.

There were a couple times I drilled too deep and the tack ended up just bouncing out of the hole. That's where I recruited a little helper I like to call KRAGLE. That's a Lego movie reference for you...it was Krazy Glue :) It worked wonderfully!

End result...
ta-da!

Let me know if you try it out! Now I just have to decide where to put it :)

DIY: My long list of projects

If you were a reader of my blog before I became pregnant, you know I love me a good DIY! I say "before I became pregnant" because lately, many of my posts are weekly updates or pregnancy related in some way. I am fully aware that I haven't been that great of a blogger these last couple months, so I apologize!

I have a lot on my list for these next few months in terms of completing the nursery, doing things around the house, etc., but there are still some crafty DIY projects I'd like to accomplish before baby arrives and my time is more limited. I thought I'd share some of them...

1. Re-cover my corkboard

I have a plain-jane corkboard that I want to re-do, Ballard-burlap-style. I am confident I can acheive this look for less, I just need to get around to it! This past weekend, I purchased my supplies, and I plan to use these two tutorials to help me finish the job...

via Frantz Featherings

via Beneath My Heart

2. Chalkboard Charger

I have had all of the materials to create this for months. I really have no good excuse for why I haven't done it!

via Southern Mess (Stephanie's blog)

3. Burlap Bed Skirt
I need a new bed skirt for our guest bedroom. (Do you say bedskirt or dust ruffle?!) The bed is full size and has a pretty quilt on it, but no bed skirt at the present time (you may have noticed here). I finally threw it away after the "skirt" portion had ripped in multiple places from the white part that laid flat on the box spring (if that makes sense?). Anyway, I've seen DIY no-sew, "easy" bed skirt tutorials on Pinterest, so I might give one a shot. We'll see.

via Styleberry Blog

4. Painted Pantry Door

Our pantry door is side-by-side with the door into our garage, so obviously I can't do one without the other. However...I'm not entirely sure that TJ will be down for this! I might have to do this sometime while he's traveling for work and surprise him with my finished project (would that be completely terrible of me?!) 

via Decor Chick

5. Curtains and pillow

I've had this pinned for awhile, and there are actually two things in the image below that I'm loving! She PAINTED these curtains using drop cloth and a stencil. I "need" (okay, want) a set of curtains for my dining room and this sounds like an awesome idea. However, I don't know if I'm suited to get down on the floor and paint them right now! Hmm. Anyway. The pillow on the chair is also one she made. I'd love some new throw pillows for my living room and this fabric is nice...butttt I may be too lazy. Home Goods might have something to fit the bill ;)

via Proverbs 31 Girl

Even though I love getting crafty, that's probably enough on the list for now. Two smaller (more realistic) projects, and two larger ones. We'll see what I'm able to accomplish over the next few months! 

I did recently complete a flag pallet for my mom, which I don't think I shared here. Like the terrible blogger that I am, I forgot to take a picture of the finished product before I gave it to her. However, she posted this picture on her facebook page.

It's a good thing I didn't inherit her photography skills.

Before-Baby Checklist

We've had plenty on our list in terms of "house" projects for quite some time, and there's nothing like a baby on the way to give us a kick in the pants to get some things done! Fortunately, we've been checking things off the list a little at a time over the last month or two...but of course, for every item checked, it seems like I add something else!

Here is my list of various things, not necessarily in the order of which they are to be completed...
(I'd love to put them in order but momma ain't got time for that)

1. Order crib & baby furniture ✓

Munire Furniture

2. Drywall repairs ✓

3. Interior house painting, including nursery ✓

4. HVAC work upstairs - humidifier, new duct work, install return vents ✓

Don't get me started on this. What idiot builder finishes a house with no return vents? Ours, evidently! This project should be finished up soon. They have a little work left to do in the attic,  but the humidifier and return vents are completed. This project was completed yesterday!

5. Remove existing furniture from guest bedroom, which will become nursery, thus moving the guest bedroom to what was previously known as the "junky room" ✓

We've moved the furniture, thankfully, and these furniture sliders from Lowes have been a Godsend! TJ lifts the furniture, I place the sliders beneath the feet, and then we just push-slide-n-guide the furniture to where we want it. This was the "junky room" on January 1st of this year...

from the post: Why do we make New Year's Resolutions?

...what an improvement!

(A new bedskirt & wall decor are on the list!)

6. Clean out closet in nursery-to-be
It's currently packed full of Christmas decorations, Christmas trees, and gift wrap, with a few random pieces of luggage thrown in for good measure!

7. Clean out closet in the newly relocated guest room
I've started on this task, but still have a LONG way to go!

8. Move items to attic to store (some Christmas items, etc.)

9. Clean carpet in nursery-to-be, following the completion of the HVAC/drywall/painting

10. Find and purchase bedding for nursery ✓
We selected the Harper bedding from Pottery Barn Kids.

11. Find and purchase a glider or rocking chair

Moms - Do you have one you recommend? It's really important to me that it comes up high enough in the back to support my entire neck and head when I lean back. However, I'd really prefer one that looks more like furniture and less "glider-like" if that makes sense...

The one on the left is from Babies R Us and the one on the right is by Dutalier.
I've sat in the chair from BRU and it does not provide enough neck support for my taste. The Dutalier chairs are super comfortable but I don't particularly love the look. I've sat in one chair that looked "my style" and it was really comfortable. It was from Pottery Barn Kids and costs an arm and leg, and I cannot really swallow the cost. I hope to find something I'm happy with SOON, comfort-wise and cost-wise.

12. Hang curtains in nursery
I have the curtains, but do not have a rod or other hardware. Buying that stuff should probably be another item on this checklist! Eek!

13. Outside - hang numbers on our porch

14. Change dining room light fixture
This is something I'd LIKE to do, but if it doesn't happen I'm not going to lose sleep over it!

15. Outside - install motion-sensing light on the side of the house

16. Clean out/organize kitchen cabinets to make room for baby products

Looking at this list makes me tired. TJ and I did a LOT of work this past weekend following the painting of our upstairs, and by Sunday night my bed had never felt so good! I was exchanging emails with my favorite pretty new-momma blogger Jess, and she told me to just get ready, because I'd be working up till the last day! Ahhh!